300 Series Non-Intumescent Mat
Product Properties
PCW (Polycrystalline Wool Fiber) Non-Intumescent Mat
Suitable for Diesel Engine、Gasoline Engine、Gas Engine
Available of TWC+GPF、DOC+DPF+SCR
Apply to Large Diameter of Monolith
Nice holding force to Thin and Ultra-Thin Wall Monolith
Applicable for GB VI Exhaust Standard
Product Structure
|
Component |
Function |
|
Polycrystalline Wool Fiber |
Provide holding force to monolith |
|
Binder |
Increase the operating condition |
Typical Physical and Chemical Properties
|
Polycrystalline Wool Fiber |
＞97% |
|
Binder |
＜3% |
|
Aging Properties |
≥55KPa |
|
Erosion Resistance Properties |
＜1% |
|
Working Temperature |
≤1150℃ |
Product Availability
|
Basic Weight g/m2 |
Nominal Thickness mm |
GBD g/cm3 |
Nominal Installed Gap mm |
|
1125 |
7.5 |
0.30-0.40 |
3.5 |
|
1275 |
8.5 |
0.30-0.40 |
4.0 |
|
1500 |
10.0 |
0.30-0.40 |
4.5 |
|
1750 |
12.0 |
0.30-0.40 |
5.0 |
|
2100 |
14.0 |
0.30-0.40 |
6.0 |
|
2800 |
19.0 |
0.30-0.40 |
8.0 |
Typical Application
Denco Industries 300 PCW non-intumescent mats with extremely erosion resistance properties meeting the vehicle control system solution under severe working conditions are widely used in Diesel Oxidation Catalyst (DOC) Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR), Gasoline Particulate Filter (GPF) and other various of emission control devices.
Denco 300 PCW non-intumescent mats are especially suitable DPF and GPF with much more stringent requirement.
